Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Dallas, TX
Gate access control in Dallas usually means one of two things: a keypad or intercom system that stopped reading codes, or a motor that no longer responds to a remote. The clay soil under the city makes every job different because posts move, frames rack, and electronics bolted to shifting steel fail faster than they would on stable ground. Call (469) 916-7097 and we’ll name the price in writing before any work starts.
Why Dallas Homes Are Different
Dallas sits on Blackland Prairie clay, the “black gumbo” that swells hard after rain and shrinks in summer drought. Gate posts in Preston Hollow and Bluffview rack 2-4 inches off vertical purely from that movement, which throws swing gates out of alignment and binds slide gates against their rails. The 1980s-2000s custom homes along the Lake Highlands corridor and North Dallas carry ornate wrought iron and tubular steel gates with aging Linear, Elite, and early LiftMaster operators hitting end-of-life together. HOA-governed communities in far north Dallas and the Oak Cliff hills frequently mandate specific gate styles, so a repair that changes the look can trigger a compliance review. Winter Storm Uri in February 2021 killed thousands of gate operators across the metroplex when hard freezes cracked hydraulic cylinders and congealed gearbox grease. Dallas technicians learn to check post alignment before touching electronics because a motor replaced on a racked post is a callback waiting for the next rain season.
Our Main Dallas Services
Dallas homeowners call Vance Gate Repair for two things most often: fixing what broke and replacing what cannot be fixed. These three services cover the bulk of the work.
Gate Repair in Dallas
When a gate grinds, sags, or stops mid-travel, the cause is usually mechanical before it is electrical. On Dallas clay, we check post plumb first because a shifted post loads the hinges, the operator, and the lock all at once. Gate Repair in Dallas covers everything from hinge and roller replacement to full frame straightening and operator troubleshooting.
Gate Installation in Dallas
New gates in Dallas need footings that account for clay movement, and many HOAs require a specific style or material before approval. We measure the opening, check the setback and swing clearances, then price the job in writing with the gate, hardware, and automation listed line by line. Gate Installation in Dallas covers new driveway gates, pedestrian gates, and full automation packages.
Gate Motor & Opener in Dallas
Operators that ran fine for fifteen years are now failing in clusters across Dallas because the 1990s building boom hardware all hit end-of-life around the same time. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule rather than steering you toward a brand we prefer. Gate Motor & Opener in Dallas covers diagnosis, repair, and replacement of swing and slide operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Dallas
Gate access control in Dallas fails on a predictable schedule: the keypad that worked through ten summers stops reading codes after the eleventh, the video intercom goes dark after a hard freeze, the card reader inside a Preston Hollow gate gets water in the housing because the gasket flattened in 105°F heat. These systems are bolted to gates that move on clay, so wiring pulls loose, boards crack at solder joints, and antenna leads snap where the frame flexes. We repair, replace, and reprogram systems on existing gates, and we leave a photo record of every connection we touched. Gate Access Control is the service hub page with full details on every system we support.
Keypad Entry
Signs you need it
The keypad beeps but the gate won’t open, some codes stopped working, or the housing is cracked and water got inside.
What it costs in Dallas
Keypad replacement in Dallas typically runs $180-$340 for the unit and programming, more if the wiring in the post needs to be pulled and re-run.
How we do it
We test the wiring at the keypad and the control board, replace the unit if needed, reprogram all codes, and photograph the final connections.
Video Intercom
Signs you need it
The screen stays dark, audio crackles or drops out, or the camera works but the gate release button does nothing.
What it costs in Dallas
Video intercom repair in Dallas usually lands between $220-$480 depending on whether the fault is the indoor monitor, the outdoor station, or the wiring between them.
How we do it
We isolate the fault to the monitor, the outdoor unit, or the cable run, replace only what failed, then test call quality and gate release together.
What Gate Access Control Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Keypad replacement | $180-$340 |
| Video intercom repair | $220-$480 |
| Card reader replacement | $200-$390 |
Can you fix a keypad that stopped reading codes in Dallas?
The keypad membrane wears out from UV exposure and the contacts stop registering presses. We replace the keypad or the membrane, reprogram all codes, and test every entry before we leave.
Do you install phone entry systems for Dallas HOAs?
Yes. Phone entry systems are common in far north Dallas HOA communities, and we install and service them on both swing and slide gates. The written quote includes the unit, wiring, programming, and testing. Call (469) 916-7097 for a price.
Gate Parts & Welding in Dallas
Welding on a Dallas gate usually starts with a hinge that tore loose or a post that shifted on clay and snapped the rail. The original ornamental iron from the 1990s can be welded and re-powder-coated, but if the post underneath has racked, the new weld will fail the same way. We align first, then weld. Gate Parts & Welding covers the full parts and fabrication side of the work.
Hinge Replacement
Signs you need it
The gate sags, scrapes the driveway, or the hinge pin has worn so thin the gate rattles in the wind.
What it costs in Dallas
Hinge replacement in Dallas typically runs $150-$320 per hinge depending on whether the post must be straightened first and the hinges welded or bolted.
How we do it
We check post alignment, cut or unbolt the old hinge, install the new one, and photograph the weld or fastener pattern before re-hanging the gate.
Post Replacement
Signs you need it
The post has racked visibly off vertical, the gate binds against the latch, or the base of the post shows rust blooms at the concrete line.
What it costs in Dallas
Post replacement in Dallas runs $300-$600 per post including the new footing and concrete, more if the old footing must be broken out with a jackhammer.
How we do it
We cut the old post at the base, break out the old footing, set the new post with a deeper footing than the original, and re-hang the gate to plumb.
What Gate Parts & Welding Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Hinge replacement | $150-$320 per hinge |
| Post replacement | $300-$600 per post |
| Rail repair | $120-$280 per section |
Can you weld a crack in a wrought iron gate in Dallas?
Yes. We grind the crack clean, weld it with the gate braced square, then re-powder-coat or paint the repaired section. If the crack came from a shifted post, we correct that first or the weld will reopen.
Do you carry gate rollers for slide gates in Dallas?
We stock steel and nylon rollers for most residential slide gates and can order uncommon sizes same week. A seized roller in a Dallas slide gate is usually the first thing to fail when clay shifts the track. Call (469) 916-7097 to check your roller size.
Brands We Service in Dallas
We work on LiftMaster, Elite, DoorKing, Mighty Mule, and the other major automation brands already mounted on Dallas gates. Common boards, remotes, and photo-eyes are stocked locally for same-week repair. Our brands page lists the full lineup.
Pricing for Gate Repair in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Keypad replacement | $180-$340 |
| Video intercom repair | $220-$480 |
| Card reader replacement | $200-$390 |
| Hinge replacement | $150-$320 per hinge |
| Post replacement | $300-$600 per post |
| Rail repair | $120-$280 per section |
| Gate rollers | $80-$200 per roller |
| Custom welding | $90-$250 per hour plus materials |
Dallas prices push toward the top of those ranges when clay movement has racked the post and the repair includes realignment before parts go on. The written price is handed to you before any work starts and does not change unless you approve a change order first.
Neighborhoods We Serve in Dallas
Our Dallas crews run the full metro area from north Dallas to the Oak Cliff hillsides, with most calls answered same day.
- Preston Hollow
- Bluffview
- Lake Highlands
- North Dallas
- Oak Cliff
Service Area - Cities Near Dallas
We also serve the cities around Dallas: Balch Springs, TX, Mesquite, TX, Garland, TX, and Sunnyvale, TX. Dispatch runs from our Dallas-Fort Worth office, so a crew can usually reach any of these cities the same day the call comes in.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dallas
Most repairs to an existing gate do not require a city permit, but new gate installations with new footings or electrical runs may need one depending on the scope. HOA rules are a separate layer, and many Dallas HOAs require style and material approval before a replacement gate goes in.
We answer the phone live 24/7 and schedule Dallas calls for the same day in most cases. Emergency calls for a gate stuck open or pinned against a car get priority, and we tell you the technician’s name before they arrive.
Yes. The 1990s and early 2000s gates across Preston Hollow and North Dallas are a big share of our work. We repair the original gate and operator when possible, and when a part is no longer made, we quote a modern equivalent in writing before anything gets replaced.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.