Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Forney, TX
Gate access control in Forney means keypads, remotes, phone entry, and video intercoms on driveway gates that were mostly installed between 2005 and 2015, then left to bake in the Kaufman County sun ever since. We service the hardware already on your property, and we hand you a written price before any tool leaves the truck. Call (469) 916-7097 when the keypad stops responding or the intercom starts buzzing instead of ringing.
Why Forney Homes Are Different
Forney’s growth surge after 2000 filled developments like Travis Ranch and Windmill Farms with ornamental iron driveway gates in a very narrow window. That means hundreds of nearly identical gates, all installed with the same generation of motors and control boards, are now failing on roughly the same schedule. A gate installed in 2008 has a motor and a main board that are both at the end of their service life. We see the same repair across twenty houses in a single subdivision in the same month, because the hardware ages out together.
The deeper issue is the Blackland Prairie clay under Forney. It swells hard after spring rain and contracts during summer drought, and that movement shifts gate posts out of plumb by fractions of an inch each season. A post that moves a quarter inch changes the travel arc of the operator enough to throw a limit switch or trigger an obstruction fault. In Forney, what starts as a keypad or motor complaint is often a geometry problem underneath. We check post position on every single visit, because ignoring it means the next repair is already scheduled.
Our Main Forney Services
Most Forney homeowners call us for two things: a gate that quit moving, and a gate that needs to be replaced or built from scratch. Here are the three services our Forney customers use most.
Gate Repair in Forney
A gate that won’t open, grinds when it moves, or sags on its hinges is a repair job. In Forney, the most common cause we find on post-2005 homes is a worn operator fighting a post that clay soil has pushed out of alignment. We replace hinges, rebuild posts, wire in new boards, and realign the whole run so the gate operates the way it did when it was installed. Gate Repair in Forney covers the full scope.
Gate Installation in Forney
When a gate is bent, rusted through, or simply the wrong size for the driveway, replacement is the honest answer. We build and hang ornamental iron and tubular steel gates sized to the existing opening, set posts deep enough to survive Blackland Prairie movement, and match the style to the neighborhood’s HOA standard. Gate Installation in Forney walks through what a full replacement involves.
Gate Motor & Opener in Forney
First-generation swing and slide operators on Forney homes built between 2005 and 2015 are expiring now. We service LiftMaster, DoorKing, and Mighty Mule operators, among others, and we repair before we recommend replacement, because a control board or limit switch is usually a fraction of the cost of a new motor. Gate Motor & Opener in Forney explains the difference.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Forney
Gate access control in Forney covers the keypads, remotes, phone entry systems, and video intercoms that decide who gets in. Homes in Travis Ranch and Windmill Farms installed these systems during the 2005-2015 build window, and the first-generation hardware is now failing in clusters, with dead keypads and fried control boards showing up across whole streets at the same time. We service the equipment already on the property, program new credentials on site, and leave a written record of every setting we touch. That documentation habit comes from Adrian Vance’s commercial access-control work, and it means the next technician, or you, never has to guess what was changed. If you’re weighing repair against an upgrade, our Gate Access Control hub page lists every system we service.
Keypad Entry
Signs you need it
The keypad intermittently rejects the correct code, or the buttons have gone soft from years of Texas sun and require multiple presses to register.
What it costs in Forney
Keypad replacement or reprogramming on a Forney swing gate typically runs $95-$145 for the parts, plus $95-$155 for the service call and programming time.
How we do it
We test the keypad’s output at the control board, replace the unit if the contacts are worn, and reprogram all codes with the homeowner on site before photographing the final settings.
Video Intercom
Signs you need it
The inside monitor rings but shows no video, or the outdoor station’s camera lens has clouded over and the picture is too washed out to identify a visitor.
What it costs in Forney
Video intercom repair or camera replacement in Forney typically runs $315-$535, depending on whether the monitor, the outdoor station, or both need replacing.
How we do it
We check voltage at the outdoor station, test the wiring run back to the monitor, and replace only the failed component rather than quoting a full system swap.
What Gate Access Control Costs in Forney
| Item | Typical range in Forney |
|---|---|
| Keypad replacement or reprogramming | $95-$145 in parts, $95-$155 labor |
| Remote control programming per remote | $50-$85 per remote, no service call if paired with another job |
| Video intercom repair or camera replacement | $315-$535 total |
How much does gate access control repair cost in Forney?
Keypad work runs $95-$145 in parts plus a $95-$155 service call; video intercom repair runs $315-$535 total. Exact pricing is written before any work starts. Call (469) 916-7097 for a free estimate.
Can you service the access control system already on my Forney gate?
Yes. We work on the equipment already installed, including LiftMaster, DoorKing, and Mighty Mule systems, and repair before recommending replacement. Estimates are free.
Gate Parts & Welding in Forney
Gate parts and welding in Forney covers hinges, posts, rails, rollers, and the custom fabrication work that keeps an aging ornamental iron gate standing straight. The clay-heavy soil in Travis Ranch and Windmill Farms pushes posts out of alignment every wet-dry cycle, and that movement stresses hinges and rails until something finally lets go. We replace the failed part, weld it in place, and document every measurement before we leave. Our Gate Parts & Welding page details the full scope of fabrication work we handle.
Hinge Replacement
Signs you need it
The gate sags visibly toward the latch side, drags on the ground when opening, or shows rust staining around the hinge barrel.
What it costs in Forney
Hinge replacement on a Forney driveway gate typically runs $175-$260 per hinge, including cutting off the old barrel and welding the new one in place.
How we do it
We support the gate weight with a jack stand, cut the old hinge off clean, weld the replacement at the original height, and photograph the weld before paint.
Post Replacement
Signs you need it
The post leans visibly, concrete at the base is cracked and crumbling, or the gate no longer lines up with the latch even after hinge adjustment.
What it costs in Forney
Post replacement in Forney typically runs $450-$800 per post, including concrete removal, a new post set below the frost line, and re-hanging the gate.
How we do it
We saw the old post at grade, break out the old footing, set a new post in deep concrete, and re-hang the gate with fresh shims and a new latch alignment.
What Gate Parts & Welding Costs in Forney
| Item | Typical range in Forney |
|---|---|
| Hinge replacement, including welding | $175-$260 per hinge |
| Post replacement, including concrete and re-hang | $450-$800 per post |
| Rail repair or reinforcement welding | $185-$250, depending on the length of weld and steel thickness |
Can you weld a broken gate rail in Forney without replacing the whole gate?
Yes. We cut out the cracked section, weld in a reinforcement plate or replacement rail, and repaint the area. Most rail repairs run $185-$250. Call (469) 916-7097 for a written quote.
How long does hinge replacement take on a Forney gate?
Most single-gate hinge replacements take two to three hours on site, including welding and paint. The gate is fully operational before we leave.
Brands We Service in Forney
We service LiftMaster, DoorKing, Elite, and Mighty Mule operators on Forney gates, plus five more automation brands. Common control boards and limit switches for these brands are stocked locally, so most repairs finish in one visit. See our brands page for the full list.
Pricing for Gate Repair in Forney, TX
| Service | Typical range in Forney |
|---|---|
| Keypad replacement or reprogramming | $95-$145 parts, $95-$155 labor |
| Remote control programming | $50-$85 per remote |
| Video intercom repair or camera replacement | $315-$535 total |
| Hinge replacement, welded | $175-$260 per hinge |
| Post replacement, concrete and re-hang | $450-$800 per post |
| Rail repair or reinforcement welding | $185-$250 |
| Gate repair service call (diagnostic) | $125-$175, applied toward the repair |
| Gate motor replacement | $500-$825, depending on brand |
| Operator control board replacement | $225-$395 |
| Limit switch or travel calibration | $110-$175 |
What pushes a Forney gate repair toward the top of these ranges is usually post movement from clay soil, a seized hinge that requires extra torch time to remove, or an operator buried behind overgrown landscaping. You get the written price before we start, under Clause 1 of the Haven Standard, and that number does not change unless you approve something new in writing.
Neighborhoods We Serve in Forney
We run calls across Forney, including the subdivisions where the 2005-2015 gate boom left the most hardware behind. Response time for most repair calls anywhere in Forney is same day or next morning, because crews are dispatched locally.
- Travis Ranch
- Windmill Farms
- Fox Hollow
- Crocodile Crossing
- Heartland
Service Area - Cities Near Forney
We also run gates in the surrounding cities. If you’re in Sunnyvale, TX, Mesquite, TX, Balch Springs, TX, or Rockwall, TX, the same written-price standard applies.
Serving Forney, TX - Our Local Coverage Area
We’re based in the Forney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Forney
Most repair calls in Forney are scheduled same day or next morning. Dispatch is coordinated from our Dallas-Fort Worth office, and crews serve Forney locally. Call (469) 916-7097 and a live person answers, any hour.
Most Forney HOAs require that any replacement gate or major structural repair match the original style and finish. We can supply the documentation and photos your HOA needs, and we recommend confirming the requirement before we start.
Yes. Every job gets a written price before tools come off the truck, under Clause 1 of the Haven Standard. There is no diagnostic fee that turns into a surprise invoice. Call (469) 916-7097 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Forney Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.